Hurley H2O Dinghy Davit
Sleek Euro Design — Lightweight Pull-On Storage for Soft & Hard Tenders.
Pioneered in 2002 as the original swim platform davit of its kind, the Hurley H2O delivers an uncompromised blend of low-profile elegance and marine durability. Designed to haul soft or hard-bottom tenders up to 350 lbs (250 lbs with 36″ Mounts), its low-profile cradle angle keeps your stern clear, preserves rear visibility, and eliminates performance-robbing “kite-flying” wind drag while underway.
Key Benefits
- Soft-to-Hard Bottom Easy Conversion: Soft-bottom setup features extra-wide 3″ pads to support heavy transom weight without damaging fabric. Upgrading to a RIB later? Simply remove the soft pads and bolt in the adjustable Chock Pads sold separately, and vice versa.
- Low Drag & Clear Stern Visibility: Low-profile cradle angle holds your tender securely against the swim platform, reducing wind resistance and preserving clear sightlines from the helm.
- Ultra-Lightweight (15 lbs): Minimal weight addition to your transom. Easy to remove, store, and re-mount in seconds.
- Low-Profile Stainless Mounts: Stainless steel quick-release plates stand just 5/8″ high, leaving your platform safe, nearly flush, and trip-free when unmounted.
- Free Platform Lip Shims Included: If your swim platform features a raised outer lip, let us know the height, and we will add 1/4” or 3/8″ shims with your purchase.
- Impervious Marine HDPE: Machined from marine-grade high-density polyethylene and stainless steel components to resist UV degradation and harsh saltwater exposure.
Product Specifications
| Features | Specifications |
| Max Capacity | Up to 350 lbs (159 kg) with standard mounts (250 lbs (113 kg) with 36″ Mounts) |
| Unit Weight | 15 lbs (6.8 kg) |
| Hull Compatibility | Soft-Bottom Inflatables & Hard-Bottom RIBs |
| Pad System | 3″ Soft-Bottom Transom Pads or Adjustable Hard-Bottom Chocks |
| Mounting Profile | 5/8″ High Stainless Steel Plates (2 bolts per plate) |
| Free Accessories | 1/4″ & 3/8″ Platform Lip Shims available upon request |
| Warranty | 2-Year Limited Warranty |
| Origin | Made in the USA (Pioneered by Hurley in 2002) |
Fit & Selection Guide
Retrieval ease depends on your tender’s total weight and your platform height above the waterline.
- Unsure Which Mount Size You Need? Fill out our quick Davit Worksheet and our R&D specialists will determine the exact mount length and shim requirements for your vessel.
- Deck Protection: Add Mount Covers as an added accessory.
- Transit Safety: Review our Recommended Tie-Down Methods for safe, secure transit in heavy seas.
(Note: Standard package includes H2O Davit cradles, selected mounts, and stainless steel plates. Mounting bolts are sold separately to accommodate varying deck thicknesses.)
H2O Instruction Manual »
Davit Worksheet Form »
Please send us pictures once you have your new davit installed.






















Gordon –
The Hurley Davits are the best made ones on the market! And customer service is so great. I send all my boating friends to hurley!
rodrigo –
I’m very satisfied with my H2O’s, they are light and well made. When not in use the hardware on my platform is almost out of sight, this summer I had a chance to use them a lot, I’m very pleased with the product. I recommend this to everyone. and I also commend the good service by Mr. Hurley.
Rod.
Randy Duncan –
Hi Leslie,
Thank you for all of your assistance in helping us in selection of the right Davit for our boat a 2018 Back Cove 32.
Attached is a photo of us proceeding upriver at approximately 15 knots on Sojourn on the Columbia River. The H2O davit works great for our needs and the dinghy is an easy on and off of our Zodiac fiberglass 8’10” Cadet RIB equipped with a 6 hp Yamaha four-stroke engine.
Best, Randy Duncan
M/V Sojourn, Portland Oregon
Robert M. Toedter –
Great products are characterized by their elegant simplicity of design and ease of use. The Hurley Marine H20 Davits check all of the boxes. With the help and advice given by Hurley’s staff, the installation was straight-forward and easy. Our dinghy (Zodiac 340 Aluminum Bottom with Mercury 5HP outboard) pulled-up easily and without undue effort onto the swim platform. Also purchased were the cleats that attach to the mounting plates to tie the dinghy to while it’s in the water, and mounting plate covers to prevent people from stubbing their toes on the mounting plates. If you have a swim platform, then the Hurley Marine H20 Davit system is a winner!